Goods will be shipped within 5 business days after payment confirmation.
This PSU is suitable for T3+57T and T3+Pro 67T.
Please reach out to our support team at miner_support@innosilicon.com.cn for disassembly and assembly instruction. Any improper operation without our instruction will invalidate the warranty.
Due to COVID-19 pandemic, shipping schedule might be affected, we will arrange the shipment based on actual situation.
1.Net Weight: 3kg
2. If you have ordered the PSU, please be aware: the PSU we provide fits for our miners but does not come with AC cable. You can order the standard IEC C19 16A AC power cable to use with the PSU.
3. T3+ PSU is more than 3000W, please purchase AC cable with 3*2.0 specifications, and 3 wire cores with diameter no less than 2.0mm.
| Type | Item | Single Board |
| Output | DC Voltage | 12V |
| Rated Current (220V input) | 275A/16A | |
| Rated Power (220V three input) | 3500W | |
| Maximum Total Output Power | 3500W | |
| Ripple Noise | ≤200mV | |
| Voltage Accuracy | ±20mV | |
| Voltage Regulation | 10V~14.6V | |
| Load Regulation | ±5% | |
| Setup, Rise Time | ≤100mS | |
| Power off Protection Trip Time | ≥5ms | |
| Input | Voltage Range | 200V~300V |
| Frequency Range | 47-63Hz | |
| Power Factor | ≥0.95 (200V/Rated load) | |
| Leakage Current | ≤3.5mA | |
| Protection | Low-voltage Protection | AC input 170V-180V |
| Output Short Circuit | Self-locking, power on again | |
| Output Overcurrent | Yes | |
| Overheat Protection | Yes | |
| Environment Conditions | Operating Temperature | -20℃~ +50℃ |
| Altitude | ≤4000m | |
| Operating Humidity | 10% ~ 90% | |
| Efficiency | Full Load Output | ≥92% |
| Structure | Dimensions | L(258 mm)*W( 228 mm)*H( 45 mm) |
| Cooling | Air blast cooling | |
| Noise | ≤75dB （Distance：1m) |
1. Delivery time: first pay, first serve.
Goods will be shipped in 5 business days after payment confirmation.
2. Please write down the recipient's name, contact information and address carefully. Shipping address cannot be changed once the order is submitted. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.
3. We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damages or losses after that shall be borne by customer side.
4. To ensure the security of high-value miners in transit, we have been implementing shipping insurance since December 26th, 2017.We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.
Sales of miner parts are different from the general consumer electronics products, which are specially customized according to customers’ needs. Please notice before purchase. The after-sales service policy is as follows. After payment, the product cannot be returned or refund.
180 days parts warranty for any miners directly purchased from Innosilicon. If any problem, please leave an after-sales message on our message board. Our technical support team will get in touch with you asap.
The price of PSU may be adjusted at any time without prior notice or price compensation to customer.
The warranty expires in the following cases:
Inquiry Email: miner_order@innosilicon.com.cnPowered by PHPCMS
Facebook
Twitter
Linkedin
YouTube