PCIe5.0

Innosilicon 32G SERDES PHY is a highly configurable PHY capable of supporting speeds up to 32Gbps within a single lane.32G Serdes including PCIe 5/4/3- Compatible with next generation PCIe standard protocol.Supporting various serial interface protocols within 32Gbps.(Pcle4.0/pcle5.0/Rapid IO/XAUI/SATA/fiber channel/10G Ethernet etc.)

The 32Gbps SERDES PHY is a low-power, area-optimized, silicon IP core designed to meet the power efficiency and performance requirements of applications for next-generation, high-speed wireline and wireless 5G infrastructure, artificial intelligence (AI), data center, edge, and graphics.

Architected to address growing performance/power trade-off challenges, the multi-protocol PHYs allow designers to easily integrate multiple protocols and electrical specifications.The PHY itself can be configured to support a wide range of HS SERDES protocols through changes to the PCS layer and register settings.

KEY FEATURES:

Supports 32Gbps serial data transmission rate
Utilizes 8-bit, 16-bit or 32- bit parallel interface to transmit and receive data
Allows integration of high speed components into a single functional block as seen by the device designer.
Data and clock recovery from serial stream on the bus
Holding registers to stage transmit and receive data
Supports direct disparity control for use in transmitting compliance pattern
Scramble and descramble with error indication
Receiver detection
Selectable Tx Margining, Tx De-emphasis and signal swing values
All IP related I/O pass 2KV HBM, 100V MM ESD test, 500V CDM
Latch-up Targets: +/-200mA @ 125°c, 1.5*Max Vsupply

List of Supported Standards:

Standard	Data Rate(s) (Gbps)
HMC-32G-VSR	12.5, 15, 25, 28, 30,32
100G (KR-4) LR/MR/SR	28
100GbE	25.78
USB3.1	10

Test Eye-diagram & Jitter Histogram （32Gbps）:

EXAMPLE APPLICATIONS:

TELL US WHAT YOU NEED We will provide a solution customized to best fit your needs.